Headlight, 7", Black & Chrome, Cafe Racer, Halogen
$110.00 AUD $70.00 AUD
Fitted with 60W / 55W H4 halogen bulb. Comprises steel shell in black with chrome plated steel rim... perfect for your cafe racer or custom project. Overall diameter: 20cm, Overall depth: 15cm. Mounting bolt thread size: M8 x 1.25mm (mounting bolts not included). There is...
Headlight, 7", Black & Chrome, Cafe Racer, LED
$113.00 AUD
Comes with 5.52W / 2.64W H4 type LED bulb from Lucas. Comprises steel shell in black with chrome plated steel rim... perfect for your cafe racer or custom project. Overall diameter: 20cm Overall depth: 15cm Mounting bolt thread size: M8 x 1.25mm (mounting bolts not included)....
Headlight, 7", Black, Cafe Style
$99.00 AUD $90.00 AUD
All steel construction in satin black finish with E-marked plastic lens. Overall diameter: 19cm, Overall depth: 15.5cm. Distance from centre of mounting hole to front of lens: approx. 6cm. Mounting thread: M8 x 1.25. Comes with 60/55W H4 type halogen bulb, and a small, 5W pilot light bulb...
Hip Armour, Draggin Jeans
$28.00 AUD
FREE SHIPPING AUSTRALIA-WIDE WHEN PURCHASED TOGETHER WITH A PAIR OF DRAGGIN JEANS Draggin Jeans CE Approved Hip Armour gives the rider peace of mind with the added protection your hips need on the road. These slip right into the hip armour pockets of the following...
Horn, Stainless Steel
$32.00 AUD - Sold Out
Replace your horn with this mini horn, small enough to hide under the fuel tank, etc. Black bracket and body with stainless steel cover. High tone (430hz +/- 20hz) 110dB +/- 5dB Includes 22mm wide x 80mm long mounting bracket with 7mm mounting holes. Horn...
Horn, Zinc Plated Steel
$26.00 AUD
Replace your horn with this mini horn, small enough to hide under the fuel tank, etc. 12 volt. Includes 80mm long mounting bracket with one 6.5mm and one 8.5mm mounting hole Horn overall diameter: 70mm Horn overall height: 36mm
from $25.00 AUD
Ignition Coil, 12 Volt, Genuine Lucas
$0.00 AUD $25.00 AUD
PRE-ORDER NOW, DISPATCHES IN 4 to 8 WEEKS. Image depicts the old Lucas-copy which is now discontinued. We now only sell the genuine Lucas coil. Diameter: 40mm. Overall Length: 120mm. 5.5 Ohm primary resistance.
Ignition Signal Sensor - Motogadget
$85.00 AUD
Ignition signal sensor (rev signal) used for nearly all capacitor discharge ignition coils and other ignition coils with poor quality ignition signals. Directly mounted to the ignition cable (high voltage cable). Not compatible with plug top coils / pencil coils.
Indicator Brackets, Black, 30-39mm
$23.00 AUD $17.00 AUD
Designed to clamp on to your fork tubes just below or above your bottom steering yoke. This listing is for 1 pair of brackets. Suits fork tubes 30-39mm in diameter. 10mm mounting hole for indicators. Comes with mounting nuts and bolts. Can be used for...
Indicator Brackets, Chrome, 30-39mm
$24.00 AUD
Designed to clamp on to your fork tubes just below or above your bottom steering yoke. This listing is for 1 pair of brackets. Suits fork tubes 30-39mm in diameter. 10mm mounting hole for indicators. Comes with mounting nuts and bolts. Can be used for...
Indicator Bulb, Small Head, BA15S, 15W, 4-pack
$16.00 AUD
Small head, single-filament indicator bulbs. Price is for 4 bulbs. Voltage: 12V Wattage: 15W Overall Length: 36.5mm Globe Diameter: 18mm Base Diameter: 15mm BA15S base
Indicator Bulb, Small Head, BA15S, 21W, 4-pack
$19.00 AUD
Small head, single-filament indicator bulbs. Price is for 4 bulbs. Voltage: 12V Wattage: 21W Overall Length: 36.5mm Globe Diameter: 18mm Base Diameter: 15mm BA15S base
Indicators (4-pack), POSH Type 71, Black
$140.00 AUD $120.00 AUD
This listing is for 4 indicators and mounting hardware. Cast aluminium with black powder-coating. 12V/23W bulbs included. Body dimensions: 37mm diameter, 60mm long Stem length: 15mm Includes mounting bolts, nuts, spring & flat washers, and wiring connection adapters to convert standard bullet connector to small bullet connector.
Indicators (4-pack), POSH Type 71, Chrome
$140.00 AUD $125.00 AUD
This listing is for 4 indicators and mounting hardware. Cast aluminium with chrome plating. 12V/23W bulbs included. Body dimensions: 37mm diameter, 60mm long Stem length: 15mm Includes mounting bolts, nuts, spring & flat washers, and wiring connection adapters to convert standard bullet connector to small bullet connector.
Indicators (4-pack), Round, Small, Chrome
$118.00 AUD
Small, cast aluminium, chrome-plated indicators with amber lenses. This listing is for 1 pair (2 indicators). Diameter: 35mm (1.38"), Length: 55mm (2.17"), Width (from outside edge of lens to end of threaded mounting stud): 95mm (3.74"), Stem Diameter: 8mm (0.315"). Includes 12V/23W bulbs. WARNING: do...
Indicators, Bullet, Large, Black
$50.00 AUD
Light-weight, pressed steel construction. Includes 12V/23W bulbs. This listing is for 1 pair of indicators (2 indicators). Diameter: 50mm. Length: 74mm. Stem diameter: 15mm. Requires 8mm diameter mounting hole.
Indicators, Bullet, Large, Chrome
$49.00 AUD $45.00 AUD
Light-weight, pressed steel construction. Includes 12V/23W bulbs. This listing is for 1 pair of indicators (2 indicators). Diameter: 50mm. Length: 74mm. Stem diameter: 15mm. Requires 8mm diameter mounting hole.
Indicators, Bullet, Machined Aluminium
$120.00 AUD
PRE-ORDER ONLY - SHIPS IN 1 TO 3 WEEKS. From POSH (Japan) This listing is for 1 pair of indicators, i.e. 2 indicators. Beautiful craftsmanship as is to be expected from POSH. Machined from billet aluminium. 12V/23W bulbs included. Body dimensions: 37mm diameter, 70mm long. Stem...
Indicators, Bullet, Slimline, Chrome, Amber Lens
$52.00 AUD
Sturdy construction. Chrome-plated, solid die-cast aluminium. Includes 12V/23W bulbs and mounting bolts. This listing is for 1 pair of indicators (2 indicators). Diameter: 31mm. Length: 76mm. Requires 9.5mm diameter mounting hole.
Indicators, POSH Type 71, Machined Aluminium
$110.00 AUD
PRE-ORDER NOW, DISPATCHES IN 2 TO 4 WEEKS Made in Japan by POSH. This listing is for 1 pair. Beautiful craftsmanship as is to be expected from POSH. Machined from billet aluminium. Shown here in clear lens. 12V/23W bulbs included. Body dimensions: 36.5mm diameter, 58mm long. Stem dimensions: 14mm...
Indicators, Round, Small, Black
$53.00 AUD
Small, cast aluminium, satin-black indicators with amber lenses. This listing is for 1 pair (2 indicators). Diameter: 35mm (1.38"), Length: 55mm (2.17"), Width (from outside edge of lens to end of threaded mounting stud): 95mm (3.74"), Stem Diameter: 8mm (0.315"). Includes 12V/23W bulbs. WARNING: do...
Jeans, Biker by Draggin Jeans
$329.00 AUD $270.00 AUD
PRE-ORDER NOW, DISPATCHES WITHIN A WEEK (subject to manufacturer availability) Everything you want in safe motorcycle clothing. Comfort. Wearability. Good looks. And they're our most affordable jeans per metre of protection. Add the Knee Guard and you've got yourself the world's best protection. Your skin...
Jeans, BLKGEN by Draggin Jeans | Black
$379.00 AUD $329.00 AUD
PRE-ORDER NOW, DISPATCHES WITHIN A WEEK (subject to manufacturer availability) Another engineering feat. Draggin's MR7+ - or 70 metres of safety - is seamlessly engineered into the jeans. Roomoto MR7+ is a thinner, lighter fabric with more abrasion resistance with the longest slide time. Roomoto®...
Jeans, Classic by Draggin Jeans | Black
$319.00 AUD $260.00 AUD
PRE-ORDER NOW, DISPATCHES WITHIN A WEEK (subject to manufacturer availability) The Classic's are the original Draggin jeans. The traditional style from the original range - part of Draggin Jean's heritage. Today it is time to upgrade. The lining has changed to Roomoto MR7+ safety lining....
Jeans, Classic by Draggin Jeans | Indigo
$334.00 AUD $299.00 AUD
PRE-ORDER NOW, DISPATCHES WITHIN A WEEK (subject to manufacturer availability) The Classic's are the original Draggin jeans. The traditional style from the original range - part of Draggin Jean's heritage. Today it is time to upgrade. The lining has changed to Roomoto MR7+ safety lining....
Jeans, Holeshot Fully Lined by Draggin Jeans
$459.00 AUD $380.00 AUD
PRE-ORDER NOW, DISPATCHES WITHIN A WEEK CE approved knee and hip armour included! Protection that's as good as race leather, Holeshot leaves all others on the startline. Lab tested and road proven to provide World-leading safety - the only jeans on the market with Full CE...
Jeans, Next Gen by Draggin Jeans | Indigo
$379.00 AUD $310.00 AUD
PRE-ORDER NOW, DISPATCHES WITHIN A WEEK (subject to manufacturer availability) Another engineering feat. Draggin's MR7+ - or 70 metres of safety - is seamlessly engineered into the jeans. Roomoto MR7+ is a thinner, lighter fabric with more abrasion resistance with the longest slide time. Roomoto®...
Jeans, Slix by Draggin Jeans
$339.00 AUD $278.00 AUD
FREE SHIPPING AUSTRALIA-WIDE! More than 7.46 seconds of abrasion resistance or slide further than an Olympic swimming pool. Super stretch, silicone coated to look like leather. Live the two wheel revolution. Leather look Silicone coated denim High street fashion Stretchy Barely visible stitching Men's. ...
Jeans, Superleggera by Draggin Jeans
$339.00 AUD $278.00 AUD
PRE-ORDER NOW, DISPATCHES WITHIN A WEEK (subject to manufacturer availability) The freedom of riding in jeans has been rewritten with the launch of Superleggera. Light was the focus. And light is its triumph. Your Levis weigh 500grams or 18 oz. Now your riding jeans...
Jeans, Twista, Black, Draggin Jeans
$379.00 AUD $310.00 AUD
PRE-ORDER NOW, DISPATCHES WITHIN A WEEK (subject to manufacturer availability) Skinny jeans from Draggin Jeans. No visible seams. Mould to your body. Coolmax Sports liner on the inside. Knee armour pockets. Men's. Each Draggin Jeans product is lined with a revolutionary combination of Kevlar® and Dyneema®, the World's...
Jeans, Twista, Blue, Draggin Jeans
$379.00 AUD $310.00 AUD
PRE-ORDER NOW, DISPATCHES WITHIN A WEEK (subject to manufacturer availability) Skinny jeans from Draggin Jeans. No visible seams. Mould to your body. Coolmax Sports liner on the inside. Knee armour pockets. Men's. Each Draggin Jeans product is lined with a revolutionary combination of Kevlar® and Dyneema®, the World's...
K-Legs by Draggin Jeans
$329.00 AUD $299.00 AUD
FREE SHIPPING AUSTRALIA-WIDE! PRE-ORDER NOW, DISPATCHES IN 5 BUSINESS DAYS. Light weight. Double layer protection. Wear DRAGGIN K-Legs under anything - you won't feel safe leaving home without them.- Long john made with DuPont™ KEVLAR® that can be worn under any trouser - Double layer protection...
Knee Armour, Draggin Jeans
$28.00 AUD
FREE SHIPPING AUSTRALIA-WIDE WHEN PURCHASED TOGETHER WITH A PAIR OF DRAGGIN JEANS Draggin Jeans CE Approved Knee Armour is the added protection your knees need on the road. Each and every pair of Draggin jeans has in-built knee pockets, allowing you to slip these right...
LED Headlight Bulb, BPF, P36D, Lucas
$42.00 AUD $34.00 AUD
Genuine Lucas, classic motorcycle headlight LED bulb. Perfect for vintage bikes struggling to generate enough electricity. These LED bulbs only require a fraction of the power required to illuminate standard incandescent bulbs. LED bulbs have a much greater lifespan than incandescent and halogen bulbs, lasting over 15,000 hours!...
LED Headlight Bulb, H4, Lucas
$41.00 AUD
Genuine Lucas, classic motorcycle headlight LED bulb. Perfect for vintage bikes struggling to generate enough electricity. These LED bulbs only require a fraction of the power required to illuminate standard incandescent bulbs. LED bulbs have a much greater lifespan than incandescent and halogen bulbs, lasting over 15,000 hours!...
LED Headlight Bulb, High Power, BPF, P36D, Lucas
$44.00 AUD $41.00 AUD
Genuine Lucas, classic motorcycle headlight LED bulb. This is a higher output BPF bulb with improved 360 degree beam angle using 16 x 3 watt bright white LED chips and a larger heat sink. Perfect for vintage bikes struggling to generate enough electricity. These LED...
LED Indicator Bulb, Lucas, BA15S
$38.00 AUD $33.00 AUD
Genuine Lucas Classic LED motorcycle bulb. Perfect for vintage bikes struggling to generate enough electricity. These LED bulbs only require a fraction of the power required to illuminate standard incandescent bulbs. Price is per bulb. Voltage: 12V Light colour: amber (suitable for either amber lens or...
LED Tail Light Bulb, BAY15D, Lucas
$42.00 AUD $32.00 AUD
Genuine Lucas, classic motorcycle LED tail light bulb. Perfect for vintage bikes struggling to generate enough electricity. These LED bulbs only require a fraction of the power required to illuminate standard incandescent bulbs. LED bulbs have a much greater lifespan than incandescent and halogen bulbs, lasting over 15,000...
from $35.00 AUD
Levers, Amal 534 Replica, 7/8"
$70.00 AUD $35.00 AUD
Aluminium, ball-ended control lever's for 7/8" bars. Distance between lever pivot bolt and end of ball: 155mm, Clamping collar length: 31mm.
Levers, Doherty 407P Replica, 7/8"
$40.00 AUD $35.00 AUD
Chrome-plated steel lever's for 7/8" bars. Distance between lever pivot bolt centre and end of lever: 145mm.
Mirror, 3" Round, Universal, Black
$35.00 AUD $26.00 AUD
Satin-black finished steel. Mirror head diameter 8cm. Arm length is 14 cm measured from the bend to the arm end, 7.5cm from the bend to the end of the threaded end. Mounting thread is M10 with a 1.25mm pitch. Thread is the standard right hand thread....
Mirror, 3" Round, Universal, Chrome
$35.00 AUD $30.00 AUD
Chrome-plated steel. Mirror head diameter 8cm. Arm length is 14 cm measured from the bend to the arm end, 7.5cm from the bend to the end of the threaded end. Mounting thread is M10 with a 1.25mm pitch. Thread is the standard right hand thread....
Mirror, 3" Round, Universal, Clamp-type, Black
$38.00 AUD $26.00 AUD
Satin-black finished steel. Mirror head diameter: 8cm Arm length: 9cm from the bend to the arm end, 3.5cm from the bend to the mirror. Clamp suitable for 7/8" bars only. Sold individually.
Mirror, 3" Round, Universal, Clamp-type, Chrome
$38.00 AUD $28.00 AUD
Chrome-plated steel. Mirror head diameter: 8cm Arm length: 9cm from the bend to the arm end, 3.5cm from the bend to the mirror. Clamp suitable for 7/8" bars only. Sold individually.
from $45.00 AUD
Mirror, 3.5" Round, Black, Short Stem
$45.00 AUD $45.00 AUD
Mirror head diameter: 88mm (3.46"), Central section of arm is 80mm (3.15") in length. Total height from base of lock nut: 140mm (5.5") Mounting stud and lock-nut thread: M10, 1.25mm pitch. Images depict left-hand mirror.
Mirror, Bar End, 4" Round
$49.00 AUD
Suits 7/8" bars. Can be used on left or right side. Chrome plated steel head. Stainless steel stem and bolts. Aluminium mounting hardware. Pivot is indented providing 8 positions. Mirror head diameter: 4" Handlebar internal diameter minimum required: 16mm Sold individually. Price is per mirror.
Mirror, Bar End, Continental, Black
$37.00 AUD $29.00 AUD
Suits 7/8" bars. Can be used on left or right side. Mirror head measures 125mm x 95mm. Sold individually.
