Gift Card
$25.00 AUD
Shopping for someone else but not sure what to give them? Give them the gift of choice with a Modern Motor Cycle Company Gift Card. Gift cards are delivered by email and contain instructions to redeem them at checkout.
GIVI PLX166 PANNIER FRAMES V35/V37 - HONDA VFR800 VTEC 02-11
$294.00 AUD - Sold Out
Specific pannier holder for V35, V37 MONOKEY® SIDE cases PLX side racks hug and curve into the tail section of your bike tighter than any previous mounting system from Givi FITS HONDA: HONDA VFR800 VTEC 02-11For use ONLY withV35/V37 pannier casesNot compatible with Givi Monokey...
GIVI V37N SIDE CASES - 37 L - FOR USE WITH PLX/PLXR FRAMES
$899.00 AUD - Sold Out
Features:37 LT of storage per case, 74 LT combinedMatt Black/Silver/Red ReflectorsSold as a pairThermoplastic construction10kg maximum capacity per caseCompatible with Givi PLX and PLXR series racks onlySecurity locksetNOTE: Brackets not included. Bike specific PLX/PLXR frames are required to mount.*Top case rack, top case and side...
from $13.00 AUD
Grips, Beston/GT Style, Black
$23.00 AUD $13.00 AUD
Available in 7/8" or 1" Length: 13cm Sold as a pair. The right grip with a slightly larger inside diameter to accommodate the throttle tube.
Grips, Beston/GT Style, Gum
$22.00 AUD $18.00 AUD
Available in 7/8" or 1" Sold as a pair. The right grip with a slightly larger inside diameter to accommodate the throttle tube. Length: 13cm
from $12.00 AUD
Grips, Early Barrel-style, Black
$22.00 AUD $12.00 AUD
Sold as a pair. The right grip with a slightly larger inside diameter to accommodate the throttle tube. Grips measure 118mm long.
Grips, Early Barrel-style, Brown
$22.00 AUD - Sold Out
Sold as a pair. The right grip with a slightly larger inside diameter to accommodate the throttle tube. Grips measure 115mm long. Available in 7/8" only. 1 inch not available.
Grips, Early Barrel-style, Gum
$25.00 AUD
Sold as a pair. The right grip with a slightly larger inside diameter to accommodate the throttle tube. Grips measure 115mm long. Beautiful looking grips. Available in a range of colours.
Grips, Early Barrel-style, White
$30.00 AUD - Sold Out
Suit 7/8" handlebars only. Sold as a pair. The right grip with a slightly larger inside diameter to accommodate the throttle tube. Grips measure 115mm long. Beautiful looking grips.
Grips, Genuine Beston's from OGK Japan
$35.00 AUD $24.95 AUD
Made in Japan by OGK. Much superior quality & finish! Softer material than the others. Available in 7/8" only. Length: 13cm Sold as a pair. The right grip with a slightly larger inside diameter to accommodate the throttle tube.
from $65.00 AUD
Handlebar Bolt-On Bracket for motoscope mini
$90.00 AUD $65.00 AUD
BLACK IN STOCK NOW. POLISHED AVAILABLE TO PRE-ORDER, DISPATCHING IN 2 TO 4 WEEKS* In connection with the combi Frame, the Handle Bar Bolt-On Bracket is used to mount the motoscope mini to the handlebar. The handlebar has to be drilled. Mounting bracket and required parts included....
from $110.00 AUD
Handlebar Clip Kit & Bracket for motoscope mini with Combi Frame
$130.00 AUD $110.00 AUD
This product allows mounting the motoscope mini with combi frame directly to the handlebars without the need to drill them. Includes mounting bracket, handlebar clip-kit and screws. The combi frame and the motoscope mini are not included.
Handlebar Clip Kit & Bracket for motoscope mini with Combi Frame (Black 7/8")
$130.00 AUD $110.00 AUD
from $85.00 AUD
Handlebar Clip Kit for motoscope mini
$110.00 AUD $85.00 AUD
The Handle Bar Clip Kit allows mounting the motoscope mini or motosign mini directly to the handlebar. Kit includes: Two clamps with stainless steel mounting screws.
Handlebars, Ace Bars (Clubman), Black
$80.00 AUD $60.00 AUD
Steel with black paint-finish,7/8 inch diameter,Width: 71cm,Centre Width: 17cm,Length of handle: 22cm.
Handlebars, Ace Bars (Clubman), Chrome
$80.00 AUD $60.00 AUD
Chrome-plated steel, 7/8 inch diameter,Width: 71cm,Centre Width: 17cm,Length of handle: 22cm.
Handlebars, Daytona, 7/8"
$65.00 AUD
PRE-ORDER NOW, DISPATCHES IN 1 TO 2 WEEKS. Steel tube, Available in chrome plating or black paint, 7/8" diameter, Rise: 7.5cm (3") approx. Pullback: 17cm (6.7") approx. Centre Width: 10.5cm (4.1") approx. Width: 74.5cm approx. Handle Length: 200mm.
Handlebars, Dirt Bike, Chrome, 7/8"
$130.00 AUD
PRE-ORDER NOW, DISPATCHES IN 2 TO 4 WEEKS. Chrome plated steel, classic dirt bike bars. Width: 80cm, Rise: 9cm, Pullback: 10cm, Centre: 12cm.
Handlebars, Low-rise, Black, 7/8"
$65.00 AUD $42.00 AUD
Suit Cafe Racer, Bobber, Street Tracker, Bratt Style. Rise: 5cm (2") approx. Pullback: 14cm (5.5") approx. Width: 68cm (26.75"), Centre Width: 13cm (5.1") approx. Handle Length: 180mm, Distance between inside edge of knurled bands: 82mm, Width of knurled bands: 22mm, Can be used in traditional...
Handlebars, Low-rise, Chrome, 7/8"
$65.00 AUD $47.00 AUD
Suit street tracker/flat tracker, bobber, Brattstyle project. Can be used in traditional position or upside-down. Rise: 5cm (2") approx, Pullback: 14cm (5.5") approx, Width: 68cm (26.75"), Centre Width: 13cm (5.1") approx, Handle Length: 180mm, Distance between inside edge of knurled bands: 82mm, Width of knurled...
Handlebars, Type-A, Black, 7/8"
$70.00 AUD $60.00 AUD
Suit street tracker/flat tracker, bobber, Brattstyle project. Rise: 6cm (2.35") approx. Pullback: 9cm (3.5") approx. Width: 82cm (32.25") approx. Centre Width: 12.5cm (4.9") approx. Handle length: 20.5cm (8") approx. Knurl width approx. 38mm. Distance between inside edges of knurls approx. 51mm.
Handlebars, Type-A, Chrome, 7/8"
$75.00 AUD $55.00 AUD
Chrome plated steel. Suit street tracker/flat tracker, bobber, Brattstyle project. Rise: 6cm (2.35") approx. Pullback: 9cm (3.5") approx. Width: 82cm (32.25") approx. Centre Width: 12.5cm (4.9") approx. Handle length: 20.5cm (8") approx. Knurl width approx. 38mm. Distance between inside edges of knurls approx. 51mm.
Handlebars, Type-B, Chrome, 7/8"
$65.00 AUD
PRE-ORDER ONLY. DISPATCHES IN 1 TO 2 WEEKS. Chrome plated steel tube. Rise: 5cm (2") approx. Pullback: 12.5cm (4.9") approx. Width: 74cm (29.1") approx. Centre Width: 11cm (4.3") approx. Handle Length: 220mm.
Headlight Bracket, Bottom Mount, Black, SR400
$75.00 AUD
Headlight bracket to mount a bottom mounted headlight to the bottom yoke of your Yamaha SR400 or SR500. Black finish from Posh (Japan). 3mm thick. 10mm diameter headlight mounting bolt hole. Holes for bolting to yoke: Diameter: 6mm, Centre to centre: 32mm, Distance from centre...
Headlight Bracket, Bottom Mount, Stainless, SR400/500
$75.00 AUD
POSH HAVE DISCONTINUED PRODUCTION OF THESE. THIS IS OUR LAST ONE! Headlight bracket to mount a bottom mounted headlight to the bottom yoke of your Yamaha SR400 or SR500. Polished stainless steel finish. From Posh (Japan). 3mm thick. 10mm diameter headlight mounting bolt hole. Holes...
Headlight Brackets, Cafe Racer Style, Black
$28.00 AUD $22.00 AUD
Traditional cafe racer style headlight brackets, in black. This listing is for 1 pair of brackets. Fits 31 to 37mm diameter forks. Can be fitted in the orientation shown in photos or alternatively upside down, lifting the headlight higher up. Distance from the headlight mounting...
Headlight Brackets, Cafe Racer Style, Chrome
$28.00 AUD $14.00 AUD
Traditional Cafe Racer Style Headlight Brackets This listing is for 1 pair of brackets. Fits 31 to 37mm diameter forks. Can be fitted in the orientation shown in photos or alternatively upside down, lifting the headlight higher up. Distance from the headlight mounting hole centre...
Headlight Brackets, Cafe Racer Style, Stainless Steel
$50.00 AUD
Cafe racer style headlight brackets in polished stainless steel. Far superior quality to chrome plated version. This listing is for 1 pair of brackets. Available to suit 31mm - 37mm diameter forks. Can be fitted in the orientation shown in photos or alternatively upside down,...
Headlight Brackets, Cafe Racer-style, Cast, Black
$58.00 AUD $39.00 AUD
Satin black, cast alloy headlight brackets with plastic reducer sleeves. This listing is for 1 pair of brackets. Fits 35, 36, 39 & 41mm diameter forks. Length: 155mm, Width: 50mm, Height: 56mm, Hole diameter: 11mm.
Headlight Brackets, Cafe Racer-style, Cast, Polished
$58.00 AUD $48.00 AUD
Polished cast alloy headlight brackets with plastic reducer sleeves. This listing is for 1 pair of brackets. Fits 35, 36, 39 & 41mm diameter forks. Length: 155mm, Width: 50mm, Height: 56mm, Hole diameter: 11mm
Headlight Brackets, Tomaselli-style, Chrome
$52.00 AUD $37.00 AUD
Quality chrome-plated steel, Tomaselli-style headlight brackets with rubber isolating bushes. Fits 35 to 36mm diameter forks using the included bushes.Will fit up to 45mm forks using alternative shimming. Distance from base of bracket to centre of headlamp mounting hole approx. 85mm.
Headlight Bulb, Halogen H4, Genuine Lucas
$11.00 AUD
60/55W, 12 volt halogen bulb. H4, P43T Suits our side mounted and 5.75" bottom mounted headlights. OEM: LLB472
Headlight Grille, 5.75", Black
$55.00 AUD
Vintage style, mesh headlight grille to suit 5.75" headlight assemblies. Installs between the headlight lens and the retaining rim. Fits most factory and aftermarket headlight assemblies which use a sealed beam type bulb that is secured with an external retaining rim. Powder coated steel. Overall diameter:...
Headlight Grille, 5.75", Chrome
$52.00 AUD
Vintage style, mesh headlight grille to suit 5.75" headlight assemblies.Installs between the headlight lens and the retaining rim. Fits most factory and aftermarket headlight assemblies which use a sealed beam type bulb that is secured with an external retaining rim.Chrome-plated steel.Overall diameter: 144mmOverall depth: 27mmNB: The...
Headlight Lens, 7"
$95.00 AUD
Genuine Wipac Quadoptic 7" beam unit. Lens has aperture for parking/pilot light. As used in our Lucas, "Vintage" style headlights. Lens only... H4 bulb required (sold separately). Headlight shell and bezel not included.
Headlight Shell (Black) & Rim (Chrome), 7", Genuine Lucas
$110.00 AUD
Vintage style, side-mounted headlight shell with rim. Comprises steel shell in black with chrome plated steel rim... perfect for your cafe racer or custom project. Genuine Lucas shell & rim. Overall diameter: 19cm/7.5", Overall depth: 17cm/6.7", There is a 4cm diameter hole in the underside...
Headlight Shell for 7" Chrome, Genuine Lucas
$110.00 AUD $100.00 AUD - Sold Out
Genuine Lucas shell & rim. Chrome-plated steel. Overall diameter: 19cm/7.5", Overall depth: 17cm/6.7", Comes with bulb connector plug. Lens has "E" mark. There is a 4cm diameter hole in the underside of this unit for routing wiring which is not visible in these images. Requires 5/16”...
from $40.00 AUD
Headlight, 4.5" Bottom-mount, Black
$60.00 AUD $40.00 AUD
123mm (4.85") rim diameter. The shell is fitted with a blue, high-beam warning light. Headlight depth (fully assembled as in pictures) approx. 105mm. M10 mounting bolt. Comes with T19 35W/35W bulb, & wiring. Available with either DOT or non-DOT lens. Does not include wiring-plug connector...
Headlight, 4.5" Bottom-mount, Chrome
$66.00 AUD $55.00 AUD
123mm (4.85") rim diameter. Headlight depth (fully assembled as in pictures) approx. 105mm. M10 mounting bolt. Comes with T19 35W/35W bulb, & wiring. Lens is not DOT approved. Please refer to last image for actual representation of lens.
Headlight, 4.5" Bottom-mount, Chrome, DOT
$75.00 AUD
123mm (4.85") rim diameter. Headlight depth (fully assembled as in pictures) approx. 105mm. M10 mounting bolt. Comes with T19 35W/35W bulb, & wiring. DOT lens.
Headlight, 5.75" Bottom Mount, Black, Model A
$85.00 AUD $80.00 AUD
Bates-style, bottom-mount, black headlight with black rim, 5.75-inch diameter. Rim diameter: 156mm, Shell diameter: 144mm, Overall depth: 105mm, M10 mounting bolt. Comes with 60W/55W halogen bulb. Model A features: - Blue high beam warning light in shell.
Headlight, 5.75" Bottom Mount, Black, Model B
$80.00 AUD $54.00 AUD
Bates-style, bottom-mount, black headlight with black rim, 5.75-inch diameter. Rim diameter: 156mm, Shell diameter: 144mm, Overall depth: 105mm, M10 mounting bolt. Comes with 60W/55W halogen bulb. Model B features: - Lens has "E" mark - Includes parking light Note: wires do not come fitted with...
Headlight, 5.75" Bottom Mount, Black/Chrome Rim
$85.00 AUD
Bates-style, bottom-mount, black headlight with chrome rim, 5.75-inch lens. Rim diameter: 156mm, Shell diameter: 144mm, Overall depth: 105mm, M10 mounting bolt. Comes with 60W/55W halogen bulb, 5W incandescent safety/parking bulb, wiring, & connector plug. Lens has "E" mark.
Headlight, 5.75" Bottom Mount, Chrome, Model A
$89.00 AUD $79.00 AUD
Rim diameter: 156mm, Shell diameter: 144mm, Overall depth: 105mm. M10 mounting bolt. Comes with 60W/55W halogen bulb, & wiring. Lens does not have E-mark as shown in first image. Refer second image for actual lens. Features: - Blue high beam warning light in shell. -...
Headlight, 5.75" Bottom Mount, Chrome, Model B
$85.00 AUD
Rim diameter: 156mm, Shell diameter: 144mm, Overall depth: 105mm. M10 mounting bolt. Comes with 60W/55W halogen bulb, & wiring. Features: - Lens has "E" mark- Includes 5W parking light
Headlight, 7" Black & Chrome, Genuine Lucas
$195.00 AUD
Vintage style, side-mounted headlight. Comprises steel shell in black with chrome plated steel rim... perfect for your cafe racer or custom project. Genuine Lucas shell & rim. Overall diameter: 19cm/7.5", Overall depth: 17cm/6.7", Comes with bulb connector plug and a 55/60W H4 type halogen bulb....
Headlight, 7" Chrome, Cafe Racer Style
$110.00 AUD
Vintage style, chrome-plated steel headlight with glass lens. 7 inches in diameter and approximately 5 inches deep. Comes with bulb connector plug and a small yellow 3W wedge-base bulb which can be used as a safety/daytime light. Also includes a 60/55W H4 type halogen bulb.
Headlight, 7" Chrome, Genuine Lucas
$195.00 AUD - Sold Out
Vintage style, side-mounted headlight. Comprises steel shell in chrome with chrome plated steel rim... perfect for your cafe racer or custom project. NOTE: LENS DIFFERS TO THAT SHOWN HERE. THESE NOW SHIP WITH THE WIPAC LENS. Genuine Lucas shell & rim. Overall diameter: 19cm/7.5", Overall depth:...
