Motogadget motoscope pro for Harley Davidson

PRE-ORDER NOW, DISPATCHES IN 2 TO 4 WEEKS*

The motoscope pro is now available as a plug & ride version for Harley Davidson models: BigTwin from 2011 and Sportster from 2014.

As a plug & ride version, the motoscope pro is pre-mounted in a handlebar clamping plate and equipped with the appropriate plug. Replacement is extremely simple and can be carried out in 10 minutes without any prior technical knowledge. Simply disconnect the plug of the original instrument, loosen the four screws of the handlebar clamp, screw on the motoscope pro with the bracket and plug the connector into the OBD socket under the seat.

No changes to the vehicle are necessary. No further adjustments to the instrument or additional accessories are necessary. Dismantling is possible at any time.

The motoscope is operated identically to the original instrument via the menu button on the handlebars.

NB: the original fuel gauge cannot be displayed via the motoscope pro.

An LED matrix display enables an ultra thin housing design. 734 LEDs controlled by a 16-bit RISC processor - create an almost rimless, self-illuminating display. It provides optimal readability even under conditions of direct sunlight assisted by automatic brightness control.

The rev-counter is displayed fully scalable via the analogue LED band with drag indicator function. Main and secondary display are user configurable. Another display section shows the gear currently engaged.

Four indicator lights are pre-installed and can be used for far more input signals.

The billet aluminium casing is cnc-machined and is easily mounted by two backside threaded holes. The instrument is equipped with an ABE approval.

Specifications and Features

Length/Width/Depth: 109 x 47 x 11mm
Weight w/ cable: approx. 100 g
Mount: 2 x M3 threaded hole
Power consumption, operating: max. 200 mA (load dependent)
Power consumption, standby: 0.4 mA (load dependent)
Operating voltage: 9 V - 15 V
Operating temperature: -20°... +80°C
Rev counter (LED bargraph): 0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer: 0 – 350 km/h or mph
Trip meter A: up to 999.9 km or mi
Trip meter B: up to 999.9 km or mi
Total mileage (adjustable): up to 250,000 km or mi
Operating hours/Service: 0 – 9999.5 h
Clock: 23:59 h/min
Hourmeter: 0 – 99:59:59 h/min/s
RPM count (on LCD): 0 – 20000 rpm
Adjustable RPM warning (gear shift flash): 0 – 20000 rpm
On-board voltage: 9 – 18 V
Low voltage warning: warning if below approx. 11V
Timer 0 - 100 km/h or 0 - 60 mph: 0.00 – 30.59 sec.
Actual accelleration: +/- 0.00 – 1.50 G
Average speed: 0 – 350 km/h or mph
Max. speed: 0 – 350 km/h or mph
Max. RPM: 0 – 20000 rpm
Max. positive acceleration: +1.50 G
Max. negative acceleration: - 1.50 G
Gear display: N, gear 1 - 6
Green control LED: Neutral (N)
Green control LED: Indicator left/right
blue control LED: High beam
Red control LED: Miscellaneous, e.g. check engine, ABS, low fuel
Fuel/Reserve: low warning
 

Package Contents

• motoscope Pro with 120cm connection cable and matching OBD plug
• Pre-assembled vehicle bracket with screws

*subject to manufacturer availability